Main Image Collection
Terrain Paints

Electrostatic powder coating process applied. This paint mixes a specific resin that offers greater hardness compared to the paints used in architecture. Terrain Paints are designed to coat aluminium profiles used in architecture and for other substrates where the maximum resistance to the outdoors is needed. This is a powder coating formulated with polyester resins and free of TGIC, pigments, and additives. These provide excellent exterior durability with very good gloss retention and colour stability.

Baking time / temperature Min: 24 to 150 °C / 75,2 to 302 °F | Max: 26 to 150 °C / 78,8 to 302 °F
Gloss at 60º angle Min: 6 / Max: 9

Direct impact 12.5 mm 30

Indirect impact 12.5 mm 30

Cross-cut adhesion 0

Erichsen Cupping test Min: 5 / Max: 11

Bend test (Cylindrical Mandrel) 6

Avg. Particle size Min: 50 / Max: 55

Particle size % <100 MICRONS Min: 80 / Max: 95

Particle size % <50 MICRONS Min: 50 / Max: 65

Particle size % <10 MICRONS Min: 4 / Max: 8

Delta E colour VISUAL

General appearance Textured
Fire resistant Flammability Colourfastness to light Physical properties
See performance
Terrain Paints (1/1)
01C Slate Stone
02C Misty Smoke
03C Ash
04C Bone
05C Tuff
06C Wet stone
07C Sand Dune
08C Dry Clay
09C Arabica
19C Sepia
16C Rose Canyon
20C Blossom
18C Ruby Dust
17C Sunset Glow
15C Terrarosa
14C Terracota
13C Amber
12C Ginger Root
11C Desert Storm
10C African Savannah
28C Spring Meadow
29C Kombu
27C Forest Stream
26C Sea Moss
25C Glacier Ice
24C Polar Sky
23C Nightfall
22C Indigo
21C Wild Lupin
33C Galena
30C Bronze
31C Corten
32C Manganese
Please note that colours displayed digitally may vary slightly from the actual product. Therefore, we recommend requesting samples before ordering.
Todos los acabados
Terrain Paints

Performance

Baking time / temperature 24 to 150 °C / 75.2 to 302 °F 26 to 150 °C / 78.8 to 302 °F Total time
Gloss at 60° angle 6 9 ISO 2813
Direct impact 12.5 mm 30 ISO 2813
Indirect impact 12.5 mm 30 ISO 2813
Cross-cut adhesion 0 0 ISO 2813
Erichsen Cupping test 5 11 ISO 2813
Bend test (Cylindrical Mandrel) 6 ISO 2813
Avg. Particle size 50 55 MALVERN
Particle size % < 100 MICRONS 80 95 MALVERN
Particle size % < 50 MICRONS 50 65 MALVERN
Particle size % < 10 MICRONS 4 8 MALVERN
Delta E colour VISUAL CIELAB
General appearance Textured NIZI-001
Polymerization Polymerization Local supplier Local supplier Class A2Class A2

Care

Preventative care Protect surfaces with barrier elements like film, paper, and peelable lacquers before placement and handling. Immediate cleaning If accidental contamination or splashing of strong alkalis or acids occurs, wash the affected area with a large amount of clean water, especially cut-outs or holes and cavities. Periodic maintenance The accumulation of dirt or contamination on the profiles may increase the risk of corrosion, a loss of sheen, or a change of colour, especially in areas located near the coast and industrial environments. Do not use Abrasive materials or tools or anything that could cause scratches. Acidic or alkaline substances that could cause corrosion. Strong solvents, including petrol, diesel, and kerosene. Grease cleaners, pesticides, or lubricants whose composition is unknown. Detergents, oven cleaners, or other similar agents. Cleaning agents when the surface temperature is greater than 25ºC. Dry cleaning a dirty surface of dust or building materials. Avoid submersing a powder coated product in water for long periods of time. Chlorine might cause damage.

Characteristics

Electrostatic powder coating process applied. This paint mixes a specific resin that offers greater hardness compared to the paints used in architecture. Terrain Paints are designed to coat aluminium profiles used in architecture and for other substrates where the maximum resistance to the outdoors is needed. This is a powder coating formulated with polyester resins and free of TGIC, pigments, and additives. These provide excellent exterior durability with very good gloss retention and colour stability.

Related documents

Design by Doshi Levien
Kettal presents their new range of paints.
The Terrain paint range has been specially developed for Kettal. Despite their textured appearance, these paints are easy to clean and their chemical composition isspecially designed to withstand scratches. The adhesion of the paint to the metal is also particularly resistant to aggressive saline marine environments and the most adverse climatic conditions.
Terrain Paints
The polymerisation process is carried out at low temperatures to optimise energy consumption at the time of application. We are able to reduce the environmental impact of production by implementing low temperature polymerisation and improving energy efficiency.

100 % Polyester powder free of TGIC and Heavy metals.
This paint mixes a specific resin that offers greater hardness compared to the paints used in architecture. Terrain Paints are designed to coat aluminium profiles used in architecture and for other substrates where the maximum resistance to the outdoors is needed. This is a powder coating formulated with polyester resins and free of TGIC, pigments, and additives. These provide excellent exterior durability with very good gloss retention and colour stability.
Copyright © 2022 Kettal, SL. All rights reserved.