Main Image Collection
Ceramics

Ceramics by Kettal is a collection of high-quality ceramics that combines functionality with elegant design. Its design aims to emulate the stone with natural grain and cracks that give a more realistic finish. Kettal tabletops therefore have imitation cracks.

Ceppo di Gré is a heterogeneous porous natural stone with a very homogeneous chemical composition.

Water absorption ≤ 0,5 % • ISO 10545-3

Thickness ± 5.0% max (± 0.5 mm max) • UNI EN 14411-G

Orthogonality ± 0,5% max (± 2 mm max) • ISO 10545-2

Flatness ± 0,5% max (± 2 mm max) • ISO 10545-2

Bending strength ISO 10545-4

Resistance deep abrasion 120-150 mm3 • ISO 10545-6

Frost resistance ISO 10545-12

Thermal shock resistance ISO 10545-9

Linear thermal expansion coefficient ≤ 9 x10-6/ºC • ISO 10545-8

Stain resistance from Class 3 to Class 5 • ISO 10545-14

Chemical resistance ISO 10545-13

Colour resistance to light exposure DIN 51094

Ceramics (1/1)
CM2 Du Gent Grey
CM3 Neutral Caliza
CM4 Royal Black
881 Ceppo di Gre
Please note that colours displayed digitally may vary slightly from the actual product. Therefore, we recommend requesting samples before ordering.
Todos los acabados
Ceramics

Performance

Water absorption ≤ 0.5% • ISO 10545-3

Thickness ± 5.0% max (± 0.5 mm max) • UNI EN 14411-G

Orthogonality ± 0.5% max (± 2 mm max) • ISO 10545-2

Flatness ± 0.5% max (± 2 mm max) • ISO 10545-2

Bending strength ISO 10545-4

Resistance deep abrasion 120-150 mm3 • ISO 10545-6

Frost resistance ISO 10545-12

Thermal shock resistance ISO 10545-9

Linear thermal expansion coefficient ≤ 9 x10-6/ºC • ISO 10545-8

Stain resistance from Class 3 to Class 5 • ISO 10545-14

Chemical resistance ISO 10545-13

Colour resistance to light exposure DIN 51094

Care

Daily cleaning
For daily cleaning, avoid the use of waxes, oily soaps, fulminic products, and various treatments (water-repellent and oleophobic) on the porcelain product, as the application of this is unnecessary. As is often the case with some detergents on the market, these contain waxes or polishing additives that, after several washes, can leave a bright sheen on the screed. Sometimes, a single drop of a drink such as Coca Cola, water, wine, etc. may be enough to eliminate this sheen, restoring the original appearance of the tile and creating a stain effect in some areas. In these cases, first remove the wax using the wax removers for the waxes applied. In the case of sheen created by soap, lime, and dirt, however, use an acid detergent diluted in water. It should be noted that hydrofluoric acid (HF) and its derivatives can irreparably damage porcelain tile. For ordinary cleaning, we recommend using bleach and ammonia, properly diluted in water. For porcelain with a polished surface, we suggest drying the screed in order to avoid visible rings.

Special cleaning
For individual and/or especially resistant stains, we suggest using specific detergents. Furthermore, do not forget that it is easier to remove any type of stain when it is still fresh. It is important to always do a preliminary test before using detergent products, especially on lapped or polished porcelain. Ceppo di gre
Advise
It is recommended to use the large 6 mm thick boards only for residential and light commercial applications, but always in contexts where there are no concentrated loads or hard wheelbarrows. Apply the adhesive using the double-spread method (colla), to ensure perfect distribution of the glue and guarantee optimum adhesion, preventing the formation of possible gaps that could cause breakage. This is due to the fact that the tile installation depends to a large extent on the optimal execution of the tile installation, its complete setting, that the appropriate expansion joints have been respected, as well as that the tile installation has been carried out correctly


Characteristics

Ceramics
Ceramics by Kettal is a collection of high-quality ceramics that combines functionality with elegant design. Its design aims to emulate the stone with natural grain and cracks that give a more realistic finish. Kettal tabletops therefore have imitation cracks.
THIS IS NOT A BREAK IN THE MATERIAL, it is printed on, as can be verified by looking at the edges, where there is no corresponding split. This simulated crack is a second step in the printing process, which achieves a slight relief so that it feels more like the real stone. The quality of this printing, so like the real thing, is an added value of the product.

Ceppo di Gre
It is a natural stone with optimal technical properties, making it frost, weather and acid resistant. In addition to façade cladding, it is particularly suitable for exteriors. Its mineralogical homogeneity, consisting exclusively of carbonates, provides excellent workability for a wide range of processes, especially with regard to slab surface finishing. The stone is geologically classified as monogenic dolomitic breccia with conglomerate appearance, belonging to clastic sedimentary rocks with calcareous matrix cementation. Due to the particular geological origin, the blocks often have a large inclusion of dolomites or clay veins, more or less closed, which pass through the blocks with two different inclinations.

Related documents

Copyright © 2022 Kettal, SL. All rights reserved.